Step-By-Step Build
1. Gather materials and lay them out
(Notice the labels.)
2. Place A1, B1, and C1 into connector D1
3. Staying with A1, connect the other end into D5
4. With a similar alignment in the D1 connector, connect B2 and C2 into connector D5
5. Staying with B2, connect the other end into D6
6. With a similar alignment in the D5 connector, connect A4 and C3 into connector D6
7. Staying with C3, connect the other end into D7
8. With a similar alignment in the D6 connector, connect A3 and B3 into connector D7
9. Use connector D8 to connect C2, B3, and A2 together.
10. Back to the top of the frame, find the connected B1 and follow it to open end and using elbow connector D2, connect the standing A4 and add/connect C4.
11. Connect the standing A3, C4, and, while adding, B4 to connector D3
12. For the last unconnected corner, use elbow connector D4. (A2, C1, B4)
13. Drape E1 over entire structure and using the net fasteners, secure the netting to a desired tightness.
Disassemble
1. Remove fasteners
2. Remove netting with care
3. Pipe by pipe, remove the connectors and pieces.
4. Store away in bag.
Disassemble
1. Remove fasteners
2. Remove netting with care
3. Pipe by pipe, remove the connectors and pieces.
4. Store away in bag.
This looks kind of complicated but I'm sure it will be easy in a step-by-step process
ReplyDeleteAlthough it might be easier to understand if there was a picture of the built tent
DeleteYea I understand, but until we build it we can't really show that graphic without confusing the builder
Delete